Search & filter

Search for a publication

Search & filter

Year

Author

City

Country

Proceedings

Papers from WTC and ITA conferences have been made available as PDF documents.

ProceedingsThere are 1984 documents.

List of endorsed conferences

  • WTC

    World Tunnelling Congress

Showing 1857 - 1872 of 1984 documents
  • Read more
    0,00 €

    Abstract: Uma Oya Multipurpose Development Project is in Sri Lanka. This project involves 2 RCC Dams connected by a Link tunnel constructed by D&B method. The water will be transferred from the first dam to the 2nd dam and then it will be transferred through a long 15.4 Km Headrace tunnel to the top of a 618 m deep pressure shaft that feeds the high-pressure water to an underground powerhouse for a...

    0,00 €
  • Read more
    0,00 €

    Abstract: Like for the other big railway tunnels under the Alps, the water drainage system of the Mont Cenis Base Tunnel provides 2 recovery systems: - one for the mountain waters considered clean; - one for the platform waters, whose potential hazardous liquids - from a possible leak on a wagon or lorry on a rolling highway train - require treatment before being returned to the river. This paper will...

    0,00 €
  • Read more
    0,00 €

    Abstract: The Port Said twin tube road tunnels are crossing the Suez Canal, Egypt, with length of bored stretch of 2,85 km. The tunnels were constructed in adverse soft soil conditions including groundwater with high salt concentration and the presence of dissolved methane gas. The twin tubes are connected with 2 cross passages of 17.4m length at 1km intervals. The two cross passages were constructed...

    0,00 €
  • Read more
    0,00 €

    Abstract: Existing road and railway tunnels in Central Europe increasingly show signs of aging and deterioration, which is particularly evident in the tunnels’ inner lining. Due to dramatic tunnel fires, and novel research findings, German authorities have reviewed and revised several guidelines for the design of tunnel structures in recent years. In the national research project KOINOR, a cement-free...

    0,00 €
  • Read more
    0,00 €

    Abstract: The slenderness of the tunnel segments is defined as the ratio between the breadth or curved length of segment along its centroid and its thickness. It is a key parameter for design of segment length between two longitudinal joints in a segmental tunnel ring. Review of tunnel projects show that rings are often divided into a number of segments that yields a segment slenderness of between 8 and...

    0,00 €
  • Read more
    0,00 €

    Abstract: Contents of boulders in soils may cause disputes between contractor and owner. Disputes may be avoided from fair baseline values in contract documents, for boulder content. A method of predicting boulder contents in glacial soils is presented. The method is based on two approaches which together utilise local geology, field observations and laboratory results, the latter from extrapolating...

    0,00 €
  • Read more
    0,00 €

    Abstract: Appropriate performance prediction of Raise Boring Machines (RBMs) in feasibility and planning stage of mechanized shaft excavation projects directly effects the economics of the projects and job completion time. This study aims to develop empirical performance prediction models for inclined reaming operations by using pilot hole drilling and reaming operational parameters and...

    0,00 €
  • Read more
    0,00 €

    Abstract: Uma Oya Multipurpose Development Project involves 2 RCC Dams connected by a D&B Link tunnel which will transferred water from first dam to the 2nd dam and then it will be transferred conveyance a 15.4 km Headrace Tunnel to the top of a 618 m deep pressure shaft that feeds to an underground powerhouse for generation of electricity. The Headrace and Tailrace Tunnels are being excavated by two 4.4...

    0,00 €
  • Read more
    0,00 €

    Abstract: The computers rapid evolution over the last two decades increased the spread of sophisticated and advanced design software. A clear example is the expansion of finite element modelling (FEM). Despite the high accuracy achievable with these models, the study of the geology and geotechnical conditions is often neglected. This paper shows how the application of probabilistic methods to the design...

    0,00 €
  • Read more
    0,00 €

    Abstract: The T34 tunnel constructed within the scope of Ankara Istanbul High Speed Train Project. During the T34 tunnel excavation, deformations of up to 58 cm occurred between Km: 230+830 - 230+708. These deformations are far above tolerance and caused the failure of tunnel supports. When the deformation measurements were investigated, it was observed that the deformations resulted in the closure of...

    0,00 €
  • Read more
    0,00 €

    Abstract: ABSTRACT: This paper addresses the problem of assessing the stability conditions of shallow excavations. A closed-form statically admissible solution, which allows an estimation of the support pressure where the cavity is at the verge of equilibrium, is presented. The solution has been derived with the assumption that the circular opening is excavated in ground modelled with the Mohr-Coulomb...

    0,00 €
  • Read more
    0,00 €

    Abstract: Mechanized tunneling operations require a high amount of water for different purposes. Most of the water is used for the cooling system of the TBM. Secondary uses of water are for the plants and machinery maintenance, segments intrados before assembly, mucking system and TBM shield cleaning. This secondary water is generally transported through a dewatering system up to a water treatment plant,...

    0,00 €
  • Read more
    0,00 €

    Abstract: During planning and execution of an artificial ground freezing project, the frost development over time is commonly prognosed using numerical models. The prediction quality of these models relies, however, directly on the given input parameters representing the thermal properties of the lithological layers. These input parameters are, nevertheless, naturally associated with unavoidable...

    0,00 €
  • Read more
    0,00 €

    Abstract: Digitalisation optimises several processes and makes information about the structures easy to access for the whole lifecycle. That's one of the reasons why a couple of industry partners established the Tunnel Digitalisation Center (TDC) in Switzerland. In the TDC, digital tools of each partners related to the tunnelling industry can be proved in the real tunnel environment and furthermore,...

    0,00 €
  • Read more
    0,00 €

    Abstract: In slurry shield tunnelling, a reliable face support is presumed if a support pressure is transferred and the slurry excess pressure provides efficient support pressure on the soil skeleton. To ensure face stability, the support pressure transfer needs to be provided within the theoretical sliding wedge after Horn (1961) at the tunnel face. Therefore, the penetration depth of the bentonite...

    0,00 €
  • Read more
    0,00 €

    Abstract: Seismic design of tunnels requires in-depth knowledge of ground and seismic properties. Current practice in seismic design evolved from keystone papers in literature while a wide variety of applications scattered from these papers can be found in case studies. In this paper, practical pin-point recommendations are presented for important points in selecting and applying seismic loads. Simple...

    0,00 €
Showing 1857 - 1872 of 1984 documents