Search & filter
Search & filter
Papers from WTC and ITA conferences have been made available as PDF documents.
List of endorsed conferences
World Tunnelling Congress
Abstract: Connecting larger inhabited Adriatic islands between themselves and with the mainland into a unique road system will be done by constructing a series of immersed tunnels through the sea, above the seabed. The tunnels will be immersed enough to ensure unimpeded ship traffic. Their position in the sea will be ensured by laying the tunnel tubes onto supports which will prevent the tubes from...
Abstract: Grouting is one of the most effective methods of improving the mechanical properties and sealing of soil and rocks in the construction environment. Various chemicals can be used as agents to lower viscosity and to improve the strength of grout; however, chemical agents are expensive. Ultrasonic excitation may promote a more homogenous mixture. This study investigated the use of ultrasonic...
Abstract: The tunnel boring machine (TBM) system, the most representative mechanized tunneling method, has been widely adopted in numerous tunneling projects. It is also quite environmentally friendly, exhibiting minimized noise and vibration when compared with conventional tunneling methods. Moreover, it provides considerable economic benefits that allow for high advance rate for long drives during...
Abstract: Foundation treatment in immersed tube tunnels aims to reduce the problem of uneven foundation trench caused by excavation. It is also used to strength soft soil in the ground. Therefore, stability and settlement of the tunnel are closely related to foundation treatment methods and construction techniques. This paper presents all immersed tube tunnels in mainland China and their foundation...
Abstract: The fibre reinforced concrete (FRC) in question is a short fibre composite, where the matrix is a quasi-brittle material: concrete, and the fibres are made of different materials (e.g. steel, polypropylene, etc.) with different shapes (e.g. round, oval, etc.), random but uniformly distributed, relatively short fibres. The synthetic fibers started to spread in the industry in the last decades,...
Abstract: In the present research, tunnel geological conditions and mineralogical properties of rock are analysed on the basis of the tunnel construction record with the occurrence of time-dependent deformation. The geology of the studied tunnel is mainly andesitic lava, dacite that includes auto- brecciated lava and pyroclastic rock, all of which have undergone hydrothermal alteration. As the results of...
Abstract: Different engineering applications including mining, tunnelling, etc. uses mechanical rock cutting process. Rock cutting is the principle work performed for the tunnelling. Various types of rock cutting process are performed these days (i.e., sawing, rotary blade, drilling etc.). Because of urbanization, more and more land is being used for structural development. Thus making underground...
Abstract: Utilization of the underground space has been linked with humans since the dawn of our species. Evidence of cave dwellings has been found in many countries all over the world during all stages of the humankind evolution. Mining for metals and minerals is almost as old as the humankind. The industrial revolution equipped us with new tools and technologies to challenge the subsurface and since...
Abstract: Recently, modeled after BIM which is used in the architectural field, CIM (Construction Information Modeling) is widely utilized in the civil engineering field in Japan. CIM has been utilized since 2012 with a goal of “reduction of total cost of construction by sharing and utilizing 3-dimensional models in the construction industry” as shown in Fig.1. In the second half of 2012, specific...
Abstract: The swelling process in the cause of the reaction of anhydrite with water has a huge influence on the vicinity and surrounding structures. This special material behaviour caused numerous problems at tunnel construction projects. Large deformations accured and damaged the construction or the sealing system. The material behaviour of anhydrite is strongly time dependent and may last over years....
Abstract: Large construction projects in inner cities have an influence not only on neighbouring buildings at the surface, but also on existing underground structures, e.g. tunnels and stations of urban metros systems. The influence on existing underground structures can be caused by the construction of new buildings or by the deconstruction of existing structures. The stability and the serviceability of...
Abstract: Tokyo Metro Co., Ltd. (“Tokyo Metro”) operates a subway network with nine lines, 195.1 km of track and daily ridership of 6.44 million in Tokyo, the largest metropolitan area in the world. More than 80 years have passed since some tunnels were built, and soft ground, saline groundwater and other factors have caused peculiar structural deformations. In this paper, we describe the use of IT for...
Abstract: A new broad gauge railway tunnel called Tunnel T-48 is a part of the main stretche of the 273 KM long Udhampur – Srinagar- Baramullaha rail project in the state of J&K, India ,covering a length of 10.2 KM comprising the Main Tunnel and the Escape tunnel of 10.20 KM length, each of which are to be bored with 7.12m and 4.5m of finished diameter respectively. Presently 6 faces out of total 10...
Abstract: 2.3km long twin bored tunnels were constructed in one of the contracts under DTL2 which is located in the western part of Singapore. After the construction of twin tunnels namely Expo Bound and Bukit Panjang Bound tunnels, 7 numbers of cross passages were constructed by mining. These cross passage will serve as a fire escape passage way between the Expo and Bukit Panjang Bound tunnels. The...
Abstract: Excavation-induced vibration is one of the main concerns in urban underground construction. The vibration during excavation can be the cause of ground disturbance, or even damage the soil structure which may have negative effect to the stability of structures nearby, and to the surrounding ground. To overcome these situations, the application of mechanical excavation using tunnel boring machine...
Abstract: This paper describes determination of tunnel cross section that considers the aerodynamic problems and the railway requirements at very long tunnel such as subsea tunnel (single track double bored tunnels, train sealing 18, train velocity 350 km/hr, tunnel length 50km). As a result, the required cross-section areas with or without the pressure reduction damper are 39 m and 47 m from an air...